Jetta Sedan L5-2.5L (CBTA) (2009)
When removing, make sure that the surface of the cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with mineral spirits and then dried.
-
Coat the piston and seal with a thin layer of assembly paste (G 052 150 A2) before installing.
-
Install the sealing ring in the brake caliper.
-
Insert the protective cap - A - into the (T10146/6) - 1 -.
-
Press the protective cap onto the brake caliper using (T10146/6) - 1 - and (T10145) - 2 - so that it makes contact all around on the brake caliper.