Jetta Sedan L5-2.5L (CBTA) (2009)
Check seating of the protective caps
-
Protective cap must no longer be able to be pulled from the brake caliper by hand.
-
Press piston lightly onto the protective cap and then secure it in this position using the (3409) - 2 -.
Do not angle piston, to avoid damaging the seal sleeve.
-
Using compressed air (max. 3 bar), blow onto the protective cap - 1 -. Protective cap springs onto the piston.
-
Press the piston into the brake caliper using (T10145) - 1 -.