Jetta Sedan L5-2.5L (CBTA) (2009)
Tail Lamp: Service and Repair
Taillamp Assembly In Rear Lid, Sedan
Rear Lamps
Taillamp Assembly in Rear Lid, Sedan
CAUTION!
‹› Turn off the ignition and all electrical consumers.
‹› Remove ignition key.
Removing
-
Unclip service cover from trim in rear lid.
-
Disconnect connector - 2 -.
-
Remove the nuts - 1 - from the taillamp in the rear lid.
-
Remove taillamp assembly.
Installing
Install in reverse order of removal, noting the following:
-
Secure washer - 2 - using a glue dot (e.g. Loctite) before inserting onto bolt head - 1 - to prevent them from falling into body.