Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove the bolts - arrows -.
‹› Seal the intake channel in the intake manifold using a clean cloth.
-
Clamp off the coolant hoses using the (3094) and disconnect them from the throttle valve - arrows -.
‹› Coolant hoses only for the throttle valve control module heated by coolant
Installing
Installation is performed in the reverse order of removal. When doing this note the following:
‹› Replace the seal for the throttle valve control module if damaged.
‹› Connection for coolant hoses.
‹› Make sure air intake ducts - 1 - and - 2 - are installed securely.