Jetta Sedan L5-2.5L (CBTA) (2009)
/Page-54002.png)
The procedure for the second shear bolt is exactly the same.
‹› If the bolts cannot be removed, cut into the heads so two parallel surfaces are formed - arrows - and then remove them using a screwdriver.
-
Insert a screwdriver - A - between the protective housing and retaining plate - arrow -.
-
Pry the protective housing upward using the screwdriver - A - and pull it off sideways from the retaining plate - arrow -.
-
Disengage the forward electrical connector - 1 - from the ECM and disconnect it.
