Jetta Sedan L5-2.5L (CBTA) (2009)
handling these parts to avoid personal injury.
-
Using a heat gun set at its medium setting, heat the shear bolt for approx. 20 to 25 seconds.
-
Remove the shear bolt with locking pliers. Discard the used shear bolts.
Repeat the previous steps for the second shear bolt.
‹› If bolts cannot be removed, saw into heads of shear bolts so that two parallel surfaces are formed -arrows- and then remove them.
-
Follow procedure as depicted below.
-
Insert a screwdriver - A -- between protective housing and retaining plate - Arrow -..