Jetta Sedan L5-2.5L (CBTA) (2009)
Rear Knuckle: Service and Repair
Wheel Bearing Housing
Wheel Bearing Housing
Special tools, testers and auxiliary items required
‹› Torque wrench 40-200 Nm (VAG 1332)
Removing
-
Remove the wheel.
-
Remove the coil spring. Refer to --> [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Coil Spring.
-
Remove the wheel hub and bearing. Refer to --> [ Wheel Bearing and Hub ] See: Wheel Bearing/Service and Repair/Rear Suspension/Wheel
Bearing and Hub.
-
Remove the cover plate.
-
Remove the wheel speed sensor from the wheel bearing housing.
-
Remove the bolt - arrow -.
-
Remove the bolts for the tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 - from wheel bearing housing - 4 -.
-
Remove the coupling rod bolt - arrow - from the wheel bearing housing.
-
Hold the wheel bearing housing firmly and remove bolts - arrows -.