Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove the coupling rod - 1 - from the trailing arm.
Installing
-
Install the bolts for the tie rod - 1 -, upper transverse link - 2 - and lower transverse link - 3 -.
-
Install the coupling rod bolt - arrow - to the wheel bearing housing hand tight.
The bolts of the trailing arm/wheel bearing housing must only be tightened when all other components (spring and strut always) of the respective
wheel suspension have been already assembled. To tighten, the suspension must be unladen. Only now do the trailing arm and wheel bearing housing
move into the position required - arrows -.