Jetta Sedan L5-2.5L (CBTA) (2009)
and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.
Only tighten the bolts if dimension "a" has been reached. Refer to--> [ between the wheel hub center and the lower edge of the wheel housing
has been attained. ] See: Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position!
-
Tighten the bolt for the tie rod - 1 -.
-
Tighten the bolt for the transverse link - 3 -.
-
Tighten the bolt - 1 - for the upper transverse link.
‹› The washer - 2 - must be installed so that there is a gap - arrow B - between the washer and cover plate - 3 -.
-
Tighten the bolt - arrow -.