Jetta Sedan L5-2.5L (CBTA) (2009)
-
Slide locking collar over synchronizer hub.
Pointed teeth - A - and shoulder - B - of synchronizer hub face in same direction. Recesses for locking pieces in locking collar and synchronizer hub
must line up (--> [ Synchronizing 5th gear ]).
-
Insert locking pieces (Location:--> [ Synchronizing 5th gear ]).
-
Install springs offset by 120° under tabs - C -. The angled end of the spring must be positioned in front of locking pieces - arrows -.
Installation of offset springs - A -
These springs are installed on both sides.
-
Springs are only installed in conjunction with hollow locking pieces.
-
Insert locking pieces (Location: --> [ Synchronizing 5th gear ]).
Installation position of springs: