Jetta Sedan L5-2.5L (CBTA) (2009)
-
Fill area between sealing lip and dust lip halfway with sealing grease (G 052 128 A1).
-
Insert flange shaft.
-
Secure flange shaft with countersunk bolt.
-
If you have removed turbocharger oil return line at engine, re-install it now - arrow - .
-
Install drive axle - 1 - to flange shaft
-
If equipped, install drive axle shield
-
Checking and filling up gear oil --> [ Transmission Oil, Checking and Filling ] See: Fluid - M/T/Service and Repair/Transmission Oil, Checking
and Filling.
-
Install noise insulation
Tightening Specifications
Flange shaft to transmission (conical head bolt) --> [ 12 Countersunk bolt, 25 Nm ] See: Differential/Service and Repair/Differential,
Disassembling and Assembling