| Adjusting drive for sliding/tilting sunroof (zero (0) position) |
| There may be a requirement to adjust the zero (0) position if the drive was removed when not in the zero (0) position or the sliding/tilting sunroof was opened or closed using the emergency key. |
| Drive removed but still connected electrically. |
| –
| Select “tilt roof” with preselection control rotary switch. |
| –
| Select “close sunroof” using preselection control rotary switch. |
| –
| Select “open sunroof” using preselection control rotary switch. |
| –
| Select “close sunroof” using preselection control rotary switch. |
| –
| Install drive in this position (zero (0) position) with sliding/tilting sunroof closed. |
|
|
|
