New Beetle L4-1.8L Turbo (AWP) (2003)
-
Remove slider -1- from retaining plate -2- (inside headlining) by starting at bottom -arrow- and prying away from clips -3-
NOTE:
-
Retaining plate inside headlining is attached to an elastic cable that is under tension
-
Illustration shows an upper cable attached to the slider
-
Some vehicles may have an elastic strap and no cable
-
Remove slider with cable(s) or elastic strap from vehicle
-
Push retaining plate clips -1- into the headlining to allow retaining plate to be removed
-
On convertible top, remove screw securing elastic cable eyelet
CAUTION:
-
ELASTIC CABLE MAY BE UNDER TENSION