New Beetle L4-1.8L Turbo (BNU) (2005)
-
Press seal with sleeve T10071-3 and M8 60 bolt - 1 - onto limit stop.
-
Install camshaft position sensor hood with notch into intake camshaft.
-
Install washer (with taper showing outward) and tighten securing bolt to 25 Nm.
-
Install camshaft position sensor housing and tighten to 10 Nm.
-
Install toothed belt guard upper part.
-
Connect camshaft position sensor connector - arrow -.
Exhaust camshaft seal (on camshaft pulley), replacing