New Beetle L4-2.0L (AVH) (2005)
-
Remove securing bolt - 1 - from rear toothed belt guard - 2 -.
-
Unscrew securing bolts - 5 - for coolant pump and remove coolant pump - 4 -.
Installing
Installation is performed in the reverse order. When installing, note the following:
-
Moisten new O-ring - 3 - with coolant.
-
Insert coolant pump - 4 -, with sealing plug in housing facing down, in cylinder block and tighten securing bolts.
-
Tightening torque: 15 Nm
-
Tighten securing bolt - 1 - for rear toothed belt guard - 2 - on cylinder head.
-
Tightening torque: 20 Nm
-
Install and tension toothed belt.
-
Install upper and center sections of toothed belt guard.
-
Install ribbed belt tensioning element.
-
Tightening torque: 25 Nm
-
Install Poly V-belt.
-
Fill with coolant.