New Beetle L4-2.0L (AVH) (2005)
Wiring Harness: Service and Repair
Electrical System, General Repair Measures
Electrical System, General Repair Measures
CAUTION:
-
Always refer to and heed CAUTION! and WARNING! texts associated with repair and/or removal and installation information in the repair
procedures.
-
Only the yellow repair cables and insulation tape supplied with VAS 1978 are to be used for wiring/connector repairs. The use of yellow repair
wires and yellow insulation tape identifies that a repair has taken place.
-
Before beginning wiring and connector repairs, determine and rectify the cause of damage, Eg.: pinched between metal parts, malfunctioning
electrical consumers, corrosion due to water ingress etc.
-
Avoid loosening or removing any individual ground connections (potential for corrosion).
-
When repairs are completed, always perform a functional check of the component or system. Where applicable, check and erase Diagnostic
Trouble Codes (DTCs) and set basic setting.