New Beetle L4-2.0L (AVH) (2005)
Wiring Harness: Service and Repair
Wiring Harnesses and Connectors, General Repair Measures
Wiring Harnesses and Connectors, General Repair Measures
CAUTION:
-
Note CAN-Bus wiring repair measures.
-
Soldering is not permitted!
-
Do not repair welded connections in the wiring harness. Fabricate and connect an appropriate overlay harness instead.
-
Wiring harness and connector repairs must only be performed using VAS 1978 Wiring Harness Repair Kit.
-
Only the yellow repair cables and insulation tape supplied with VAS 1978 are to be used for wiring/connector repairs. The use of yellow repair
wires and yellow insulation tape identifies that a repair has taken place.
-
All shielded wiring (Eg.: knock sensors, antenna etc.) are Not to be repaired! Replace complete wiring harnesses as necessary.