New Beetle L4-2.0L (AVH) (2005)
The modified tie rod ends have the following identifying characteristics:
A - Right tie rod end
1 - Hex head on thread shaft, Across Flats 19 mm
-
Dimension - a - : 94 ± 0.5 mm
-
Identification "A" for right
B - Left tie rod end
1 - Hex head on thread shaft, Across Flats 19 mm
-
Dimension - a - : 94 ± 0.5 mm
-
Identification "B" for left
Identifying characteristics of previous tie rod ends
1 - Flat for wrench on shaft, with identification "R" or "L", Across Flats 22 mm
-
Dimension - a - : 74 - 1 mm
-
Shaft - arrow - is round
CAUTION: These tie rod ends must not be installed on tie rods with length - a - 318.9 mm!
Tie Rods, Modified
Tie rods, modified
Tie rods were shortened.