New Beetle L4-2.0L (AVH) (2005)
-
Remove securing screws - arrows -, - arrows A - and - arrows B - of valve body using a diagonal sequence and carefully remove valve body.
-
Remove retainers - 1 - and - 4 -.
-
3 - Valve body designation, here e.g. A2
Note:
-
The bolts/screws are of various lengths and must be replaced.
-
Only the bolts/screws - arrows - as marked may be removed.
-
Loosening other bolts/screws can affect the function of the valve body or separate the valve body.
-
When valve body is removed, it may be necessary to secure damper piston - 2 - to prevent it falling out. Or, remove damper piston along with both
springs beforehand.
Installing
Note: Observe the routing of the wiring harnesses exactly, otherwise they may become trapped when the valve body is installed.