New Beetle L4-2.0L (AVH) (2005)
Note: The opposing connector must have the same markings as the connector to be connected.
-
Install retainer to Transmission fluid temperature sensor -G93- - 7 -.
-
Install Transmission fluid temperature sensor -G93- along with retainer out of valve body.
-
Tighten bolt/screw - 6 - to 11 Nm.
-
Reconnect connectors horizontally onto hydraulic pressure sensors - 1 - and - 4 -.
-
Tighten retainer bolts - 3 - for connectors - 2 - and - 5 -.