New Beetle L4-2.0L (AVH) (2005)
Note: If the wires are too short to be secured, then they have been routed incorrectly or they are trapped by the valve body. Remove the valve body
again and re-route the wires correctly.
-
Hook wiring harness into retainer - 8 - and route it as shown in illustration.
-
Install oil strainer.
-
Install oil pan.
-
Fill with ATF, check ATF level and top up.
-
Connect battery Ground strap.
-
Enter radio code
-
Initialize power windows, set correct time on clock
-
Connect Vehicle Diagnosis, Testing and Information System VAS 5051 A and switch until "function/component selection" is displayed.
-
Then press "Drive (Repair group 01;10 - 26; 28 - 39)".
-
Then press "6-speed automatic gearbox 09G".
-
Press "01 - Self-diagnosis".
-
Press "Functions".
-
Press "Basic setting".