New Beetle L4-2.0L (BEV) (2004)
Special tools and equipment
^
3259 Tube
^
3345 Tube
^
V.A.G. 1331 Torque wrench
^
1-Kukko 21/7 Internal puller
^
4-Kukko 22/2 Counter support
The differential must be adjusted, when
^
Transmission housing
^
Clutch housing
^
Differential housing
or the
^
Differential tapered roller bearing have been replaced.
Adjustment overview, Refer to Adjustment Overview
^
Press tapered roller bearing outer race with shim (thickness 0.65 mm) into clutch housing.
Note:
Inner and outer tapered roller bearing races are a pair. Do not interchange.
^
Press tapered roller bearing outer race without shim into transmission housing.
^
Fit differential into clutch housing
^
Fit transmission housing and tighten 5 bolts to torque setting.