New Beetle L4-2.0L (BEV) (2004)
/Page-1164004.png)
^
Press differential in direction of clutch housing and when doing this turn it eight times.
^
Press differential in direction of transmission housing and when doing this turn it eight times.
^
Mount dial gauge and "0" with 1 mm preload.
A- Dial gauge extension 30 mm
^
Move differential up and down and recall play indicated on dial gauge (Example: 0.70 mm).
Determining shim thickness
The specified bearing preload is obtained by adding a constant figure (0.30 mm) to reading obtained.
Example:
^
Take off transmission housing.
^
Pull tapered roller bearing outer race out of transmission housing.
A - Counter support, e.g. Kukko 22/2
B - Internal puller 46 to 58 mm, e.g. Kukko 21/7
^
Insert shims of correct thickness, thickest shim first.
