New Beetle L5-2.5L (BPR) (2007)
‹› Welding and straightening work on supporting or wheel bearing components of the front suspension is not permitted.
‹› Always replace self-locking nuts.
‹› Always replace corroded bolts/nuts.
1
Drive axle
‹› Pressing drive axle out and in from wheel hub => [ Drive Axle with CV Joint and Triple Roller Joints AAR 2000 and AAR 2900 ] See:
Transmission and Drivetrain/Drive Axles, Bearings and Joints/Axle Shaft Assembly/Service and Repair/Removal and Replacement/Drive Axle
with CV Joint and Triple Roller Joints AAR 2000 and AAR 2900.
2
ABS wheel speed sensor
3
Socket head bolt
‹› M6 x 16
‹› Tightening specification => [ Wheel Bearing Housing ] See: Suspension/Specifications/Front Suspension.
4
Strut
5
Hex bolt
‹› Always replace after removal
‹› Hex bolt point must face in direction of travel
6
Tie rod end