New Beetle L5-2.5L (BPS) (2006)
Headlamp Alignment Actuator: Service and Repair
HID Headlamp
HID Headlamp
Headlamp Range Control Positioning Motor
CAUTION!
‹› Turn off the ignition and all electrical components.
‹› Remove the ignition key.
Removing
-
Remove headlamp.
-
Remove the cover. Refer to => [ HID Bulb ]. See: Service and Repair/Removal and Replacement/HID Headlamp/HID Bulb
-
Remove the screws - arrows - on the positioning motor.
-
Remove the ball head on the axle from the reflector.
-
Disconnect the connector on the headlamp range control positioning motor.
Installing
Install in reverse order of removal, noting the following:
-
Make sure the headlamp is working correctly.
-
Perform basic setting of headlamp, refer to => [ HID Headlamp, Basic Setting ] See: Service and Repair/Procedures/HID Headlamp, Basic Setting
.