New Beetle L5-2.5L (BPS) (2006)
-
Pull button - 2 - out of handle - 4 - until it stops - arrow -.
-
Secure button from springing back e.g. using a wire bracket - 3 -.
-
Remove selector lever handle.
Installing
-
Move selector lever in position "R".
-
Pull button - 2 - out of handle - 4 - until it stops - arrow -.
-
Secure button from springing back e.g. using a wire bracket - 3 -.
‹› Installation position: Button faces driver.
-
Press handle onto selector lever up to stop.
-
Remove wire bracket.
-
Press button to secure pull lever - 5 - in pull-rod - 6 -. Button must now spring back to stop again.
-
Rotate and slide sleeve - 1 - upward until tabs in sleeve engage and lock audibly into slots of handle - 4 -.
-
Move selector lever in position "P".
Selector Mechanism Cover and Circuit Board