New Beetle Convertible L5-2.5L (BPR) (2007)
-
Using screwdriver, guide long tension strap - 1 - through securing strip of convertible top padding - 2 - and pull out. To do so, place screwdriver in
hole of long tension strap and pull out long tension strap in - direction of arrow -.
-
Place long tension strap - 2 - behind short tension strap - 1 -.
-
Align mounting bores of both tension straps.
-
Secure both tension straps to frame using pop rivets - 3 -.
‹› Observe correct position of tension straps (as shown in illustration).
-
Open convertible top half way.
-
Insert tubing into C-pillar channel in - direction of arrow -.