volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Power Steering Pump|Testing and Inspection|Page 4583 > < Power Steering Pump|Testing and Inspection|Page 4581
Page 3
background image

-

Diesel engines: 96 - 105 bar (1392 - 1523 psi) 

Notes:  
-

If the reading is higher or lower than specified. replace the power steering pump.

-

Removing and installing power steering pump, vehicles with pump in lower section.

-

If power steering fluid reservoir level is low. check steering system for leaks.

-

For leaks at the pinion: first check the hoses and line connections for leaks and if necessary tighten and wipe dry.

-

If the pinion seal or the rack seals in steering gear housing are leaking: replace the steering gear.

-

To check the rack seals: loosen the clamp on the boot and push the boot to one side.

Vehicles with power steering pump in upper section 

-

Remove engine cover (arrows).

-

Clamp return hose using 3094 hose clamp.

-

Clamp suction hose using 3094 hose clamp.

-

Place drip tray underneath.

-

Disconnect pump pressure line.

Connecting VAG1402 pressure gauge 

Power Steering Pump|Testing and Inspection|Page 4583 > < Power Steering Pump|Testing and Inspection|Page 4581