Passat (B3)
| Repairing seat frame with mechanical height adjustment |
| 1 - | Spring |
| q | In frame of seat base |
| q | Retainer for height adjustment |
| q | Spring pressure increases as seat height decreases |
| 2 - | Cable |
| q | For seat height adjustment |
| q | Hooked in at front beneath seat base |
| 3 - | Height adjustment mechanism |
| 4 - | Thrust piece |
| q | Press thrust piece in guide plate and fold over tab |
| 5 - | Clip |
| 6 - | Guide |
| 7 - | Guide plate |
| q | Riveted with reinforcement plate |
| 8 - | Reinforcement plate |
| q | Riveted with guide plate |
| 9 - | Hexagon head bolt |
| q | 60 Nm |
| 10 - | Height adjustment control shaft |
| 11 - | Base structure |
| 12 - | Cross-head screw |
| q | 4 Nm |
| q | Microencapsulated (locking fluid) |
| q | Renew bolt, remove adhesive remains in thread of nut using tap, coat new bolt with locking compound -D 185 400 A2- |
| 13 - | Bearing bush |
| 14 - | Adjustment lever |
| q | For height adjustment |
| q | Fit during assembly work |
| 15 - | Adjustment lever |
| q | For tilt adjustment |
| q | Fit during assembly work |
| 16 - | Tilt adjustment control shaft |
| 17 - | Tilt adjustment shaft |
| 18 - | Guide |
| q | Lubricate contact surface of seat frame with multi-purpose grease |
| 19 - | Bearing bush |
| 20 - | Bearing clamp |
| 21 - | Release lever |
| 22 - | Detent rod |
| q | Lubricate with multi-purpose grease |
| 23 - | Spring |
| 24 - | Spring |
| q | Retainer for tilt adjustment |
| q | Hooked in between base structure and tilt adjustment shaft |
