Passat (B3)
| Assembly overview - rear door trim |
| 1 - | Trim |
| q | Space for treble speaker |
| 2 - | Cover |
| q | Clipped into door handle body. |
| 3 - | Door handle body |
| 4 - | Cross-head screw |
| 5 - | Cross-head screw |
| 6 - | Locking knob |
| q | Unscrew from locking rod. |
| 7 - | Trim collar |
| q | After trim has been removed, unscrew locking button → Item from securing rod and remove trim plate |
| 8 - | Cross-head screw |
| 9 - | Trim panel |
| q | Removing and installing → Chapter |
| 10 - | Trim |
| q | Pull off door frame at an angle of 90 degrees |
| q | When doing this, support with release lever -80 - 200- |
| 11 - | Trim clip |
| q | To remove, push through spreader pin |
| 12 - | Cross-head screw |
| 13 - | Cross-head screw |
| 14 - | Retaining bracket |
| q | To remove, push through spreader pin |
| 15 - | Rubber inlay |
| 16 - | Stowage compartment |
| q | Screwed to rear of trim |
| 17 - | Loudspeaker cover |
| q | Attached to rear of trim with retainers |
| 18 - | Window crank |
| q | Removing and installing → Chapter |
| q | Installation position with window closed 45° ± 12° |
