Volkswagen Passat Workshop Service and Auto Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
Installing >
< Removing and installing rear door trim
Removing Rear Door Trim for Passat (B3) | General Body Repairs | Trim & Insulation
Body
General body repairs
Trim, noise insulation
Door trims / moving_and_installing_rear_door_trim/">Removing and installing rear door trim
Removing
Removing
Removing
–
Lever out cover
-1-
from base of door puller
-2-
.
Vehicles with electric window regulators
–
Separate connector
-1-
for rear left or right window regulator switch in door -E52 bzw. E54- and connector
-2-
for treble speaker (R 14 or 15).
Vehicles with mechanical window regulators
–
Unclip cover in
-direction of arrow-
.
–
Unscrew bolt
-2-
with lock washer.
–
Pull off crank.
Note
Installation position with window closed 45 ° ± 12 °.
Continued for all vehicles
–
Remove cross-head screws
-1-
.
–
Remove cross-head screws
-1-
and
-2-
on front and rear edge of door trim.
–
Pull out door trim at top from window aperture
-arrow-
and then lift out at bottom from retaining brackets.
Body
General body repairs
Trim, noise insulation
Door trims / moving_and_installing_rear_door_trim/">Removing and installing rear door trim
Removing
Installing >
< Removing and installing rear door trim