Without needing to purge refrigerant circuit of contaminants (e.g. damage in an accident); no refrigerant has escaped and no moisture or dirt has entered refrigerant circuit |
–
| Drain refrigerant circuit. |
–
| Remove receiver or reservoir. |
–
| Clean any dirt out of receiver or reservoir. |
–
| Weigh receiver or reservoir that was removed. |
Note t
| Fill enough refrigerant oil into the new reservoir or collector so that it has the same weight as the container which was removed. |
t
| Install new receiver or reservoir. |
–
| Assemble refrigerant circuit, evacuate and charge. |
|
|
|