Removing and installing parts of fuel supply system
Removing and installing parts of fuel supply system
Notes:
-
◆ Hose connections are secured with either screw, windlass or spring-type clips.
-
◆ Always replace clamp-type clips with spring or screw-type clips.
-
◆ Fuel hoses in engine compartment must only be secured with spring type clips. The use of clamp or screw type clips is not permissible.
-
◆ V.A.G 1921 pliers are recommended when installing spring-type clips.
Observe safety precautions
.
Observe rules for cleanliness => Page 20-15
.
Adjusting throttle cable => Page 20-16
.
|