Volkswagen Workshop Service and Repair Manuals

• ● No fault stored in fault memory
• ● Engine oil temperature at least 80 °C

• ● Ignition timing OK., , checking idling speed

• ‒ → Connect ignition tester V.A.G 1367 with pick-up clamp V.A.G 1367/8 or ignition tester V.A.G 1767.
• ‒ Start engine and run at idling speed.
• ‒ Set ignition tester to 2800 rpm.
• ‒ Slowly increase speed to slightly above 2800 rpm until the ignition timing (advance angle) is indicated.
       Specification: 35...45 ° before TDC

If the ignition timing does not advance:

• ‒ Carry out electrical check , if necessary renew control unit (J169).