Passat (B3)
| Assembly overview - hydraulic unit, RHD |
Note| The pump and valve block must not be separated from one another. |
| 1 - | Bracket |
| q | Secured to mounting plate. |
| 2 - | Self-locking nut, 10 Nm |
| q | Always renew. |
| 3 - | Rubber damper |
| 4 - | Self-locking nut, 25 Nm |
| q | Always renew. |
| 5 - | Stud, 8 Nm |
| 6 - | ABS hydraulic unit |
| 7 - | Brake line connection |
| q | Hydraulic unit to front left brake caliper. |
| 8 - | Brake line connection |
| q | Hydraulic unit to rear right wheel brake cylinder/brake caliper. |
| 9 - | Brake line connection |
| q | Hydraulic unit to rear left wheel brake cylinder/brake caliper. |
| 10 - | Brake line connection |
| q | Hydraulic unit to front right brake caliper. |
| 11 - | Control unit |
| 12 - | Heat shield |
| 13 - | Bolt, 8 Nm |
| 14 - | Clip |
| 15 - | Brake line |
| q | Brake master cylinder/secondary piston circuit to hydraulic unit. |
| 16 - | Brake line |
| q | Brake master cylinder/primary piston circuit to hydraulic unit. |