Passat (B3)
Removing and installing rear brakes |
1 - | Grease cap |
q | Removing and installing → Fig.. |
2 - | Split pin |
q | Renew. |
3 - | Locking ring |
4 - | Hexagon nut |
q | Adjusting wheel bearing play → Fig.. |
5 - | Thrust plate |
6 - | Outer wheel bearing |
7 - | Brake drum |
Vehicles with front-wheel drive. |
q | Brake drum diameter 230 mm. |
q | Wear limit 231.5 mm. |
q | Clean thoroughly, check for wear, damage, tolerances, damaged wheel bolt threads and perfect braking surface. |
q | Fill hub with multi-purpose grease. |
q | Checking out-of-roundness → Fault finding Running gear No. 15. |
8 - | Rotor |
q | Only vehicles with ABS. |
9 - | Stub axle |
10 - | Hexagon socket head bolt, 10 Nm |
11 - | Speed sensor |
q | Only vehicles with ABS. |
q | Insert with lubricating paste -G 000 650-. |
12 - | Brake backplate with brake shoes |
q | Release adjustment before removing brake drum → Chapter. |
13 - | Dished spring |
q | Larger contact surface to brake backplate. |
14 - | Hexagon bolt, 60 Nm |