Passat (B3)
Repairing front suspension strut (basic and Plus running gear) |
1 - | Shock absorber |
q | Can be renewed separately. |
q | Disposal → Special Information Running gear No. 2. |
q | Checking shock absorber for leaks and noises → Special Information: Running gear No. 17. |
q | After renewing set camber and toe → Chapter. |
2 - | Bump stop |
3 - | Protective sleeve |
4 - | Coil spring |
q | Removing and installing → Fig.. |
q | Observe colour coding. |
q | Surface of coil must not be damaged. |
q | Is curved slightly. |
5 - | Spring plate |
6 - | Deep groove ball thrust bearing |
7 - | Hexagon nut, 60 Nm |
q | Loosening and tightening → Fig.. |
8 - | Suspension strut mounting |
9 - | Limit stop |
10 - | Self-locking hexagon nut, 60 Nm |
q | Loosening and tightening → Fig.. |
|
|