Executing self diagnosis
Notes on fault table
-
◆ All the possible faults which can be recognised by the ABS control unit (J104) and printed-out on V.A.G 1551, are listed on the following pages according to the 5 digit fault code.
-
◆ Fault code and flash code appear (in the "Rapid data transfer" mode) only on the print-out.
|
---|
Example:
|
|
Fault code
|
|
5 digit
|
|
00277
|
|
-
◆ Additionally the type of fault can also appear in the fault table.
-
◆ Reference is made to individual test steps of the Electrical test in the column "Rectifying fault".
-
◆ Before replacing components indicated as being faulty, check all the appropriate connectors, wiring and earth connections using the current flow diagram.
-
◆ After carrying out repairs, always interrogate and erase the fault memory with fault reader V.A.G 1551, also carry out a road test (exceeding a speed of 40 km/h).
-
◆ Repeat the self-diagnosis after the road test.
|