volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing control element > < Cruise control system (CCS)

Passat (B3)

Assembly overview - cruise control system (CCS)
Assembly overview - cruise control system (CCS)
  Caution
Always disconnect the battery earth strap before working on the electrical system.
t  The relevant current flow diagram can be found in the Current flow diagrams, Electrical fault finding and Fitting locations binder.
  Note
The respective fault finding program is located in the test system -V.A.G 1466-.
   
1 - Accelerator
2 - Accelerator control element
q   Left vent or footwell vent with centre console must be removed to remove or adjust the control element → Heating, air conditioning system; Rep. Gr.80
q   Removing → Chapter.
q   Adjusting → Chapter
3 - Cruise control system control unit
q   Behind centre console, removing and installing centre console → General body repairs; Rep. Gr.68
4 - Vacuum line junction piece
5 - Cruise control system switch -E45-
q   Removing and installing → Chapter
6 - Cruise control system wiring harness
7 - Clutch pedal switch -F36-
q   Removing and installing → Chapter
8 - Brake pedal switch -F47-
q   Removing and installing → Chapter
9 - Vacuum lines
q   Leak test → Chapter
10 - Relay plate
q   Removing and installing → Chapter
11 - Vacuum pump for automatic distance control system -V18-
q   Removing → Chapter.

   

Removing control element > < Cruise control system (CCS)