Passat (B3)
Assembly overview - steering wheel |
1 - | Cover with button for horn |
q | Removing cover cap → Chapter |
q | Removing button → Chapter, vehicles with driver airbag → Chapter |
2 - | Hexagon nut |
q | 40 Nm |
3 - | Spring washer |
4 - | Steering wheel |
q | Contact ring for horn plate → Chapter |
5 - | Steering column switch securing screws |
6 - | Switch for turn signals, cruise control system, main and dipped beam, headlight flasher and hazard warning light switch |
q | Removing → Chapter. |
7 - | Windscreen wiper and wipe/wash switch |
q | Removing → Chapter. |
8 - | Trim - upper part |
9 - | Trim - lower part |
10 - | Outer sleeve |
11 - | Steering column |
12 - | Support ring |
13 - | Securing bolt for steering lock housing |
q | 10 Nm |
14 - | Steering column lock housing |
q | Removing and installing → Chapter |
15 - | Ignition/starter switch |
q | Remove steering lock housing, then unscrew securing bolt |
16 - | Contact ring |
17 - | Lock cylinder |
q | Removing and installing → Chapter |
18 - | Spring |
19 - | Clamping washer |