Passat L4-1984cc 2.0L DOHC (1991)
^ read display
Note
The measuring block values can only be read with the tester program card /2 installed.
^ press keys 0 and 1 (this selects group number 01 and displays values corresponding to group 01 in following chart)
^ press 0 key to acknowledge input
^ read display
^ repeat group number entry for remaining groups (02 through 05) and press print key after each new display appears to print a record of diagnosis
^ see specified values
^ if specified values appear on all channels press arrow key; the problem has not been found using this test sequence
^ if specified values are not observed, conduct return to basic setting (see Repair Manual microfiche1 Group D3) and follow instructions in chart for
further testing
Measuring Block Valves, overview
Measuring Block Valves