Flywheel: Specifications (page 2 of 4)
- Make
- Volkswagen
- Model
- Passat
- Engine
- V6-2.8L (ATQ)
- Year
- 2004
- Section
- Flywheel
Transmission and DrivetrainSpecifications · page 2 of 4
/Page-2164001.png)
Flywheel: Service and Repair
Special tools and equipment
^
3242 Clamping bolt
^
VAG 1331 Torque wrench (5-50 Nm)
^
VAG 1332 Torque wrench (40-200 Nm)
^
Depth gauge
Removing
-
Remove sealing plug from cylinder block, left.
-
Position crankshaft to TDC No. 3 cylinder. Crankshaft TDC drilling must be visible (or be able to be felt) in sealing plug hole.
-
Screw damping bolt 3242 into hole so that crankshaft is secured against turning.
Pinch or Ctrl + scroll to zoom. Double-tap to reset.
Parts & tools for this job For 2004 Volkswagen Passat 2.8L
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.