Passat Sedan L4-2.0L Turbo (CCTA) (2010)
/Page-405010.png)
Removing
-
Loosen the oil filter cartridge - arrow - with the oil filter wrench (3417).
-
Loosen the filter several turns. Wait a few seconds so the oil between the filter and the housing can flow back into the engine oil pan. Now remove
the filter completely.
‹› Observe waste disposal regulations!
Installing
-
Clean the sealing surface before installing the oil filter cartridge.
-
Lightly oil rubber gasket on new filter. This achieves the best possible seal when tightening the filter.
-
Tighten the filter to 22 Nm with the torque wrench (V.A.G 1331).
Engine Oil, Filling
03 - Service Procedures
Engine Oil, Filling
‹› Ensure cleanliness so that no oil misses the mark.
‹› For oil specification, refer to Owners Manual.