Passat Sedan V6-2792cc 2.8L DOHC (AAA) SFI (1997)
-
Lever for flap for footwell vent and defrost cannot be disassembled.
7 - Fresh air blower series resistance with fuse -N24-
8 - Lever for temperature flap
9 - Screw for lever
1O - Lever for central flap
11 - Lever for main shut-off flap
12 - Fresh air blower -V2-
13 - Footwell vent.
14 - Cover for foot pedals
With A/C
Evaporator/Heater Housing Assembly
WARNING: Automotive refrigerant containing CFC's is hazardous to the earths atmosphere. To protect our environment use an
Underwriters Laboratory (UL) approved refrigerant recovery/recycling unit such as Kent-Moore ACR3, or equivalent, whenever discharging
an A/C system.
The fresh-air blower can be reached by removing the glovebox. Virtually any other work on components of the air distribution housing, including the
heater core or the A/C evaporator, requires discharging the A/C system, draining the engine coolant, and removing the instrument panel.
See: Body and Frame/Interior Moulding / Trim/Instrument Panel/Dash Board/Service and Repair
Note:
Remove air distribution and evaporator housing to replace components 1, 2, 3, 4, 5, 6, 8, 9, and 15 (identified with an *).
The instrument panel must be removed before removing Air Distribution and Evaporator Housing. Refer to Instrument Panel Service and Repair. See:
Body and Frame/Interior Moulding / Trim/Instrument Panel/Dash Board/Service and Repair
1
Air distribution housing *
Flaps cannot be replaced separately