Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4390

Page 2
background image

When removing, make sure that surface of cylinder is not damaged. 

Installing

-

The surface of the piston and seal must only be cleaned with mineral spirits and then dried.

-

Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.

-

Install sealing ring in brake caliper.

-

Insert the protective cap - A - into the Disk (T10146/6) - 1 -.

-

Press the protective cap with the assembly tool - 1 - and the piston resetting tool - 2 - into the brake caliper so that it contacts the brake caliper all
around.

Brakes and Traction Control > Disc Brake System > Brake Caliper > Component Information > Service and Repair > Removal and Replacement > Page 4390

[PREV PAGE] [NEXT PAGE]