Do Not Sell My Personal Information
volkswagen Workshop Repair Guides

Volkswagen Workshop Manuals

< PREV PAGE NEXT PAGE >
Page 2
background image

‹› Before disconnecting the connectors, mark them to the components.

-

Disconnect the following connectors.

1 - Camshaft Position (CMP) Sensor (G40)

2 - Camshaft Adjustment Valve 1 (N205)

3 - CMP Sensor 2 (G163)

4 - Camshaft Adjustment Valve 1 (Exhaust) (N318)

-

Free up the wiring harness.

-

Remove the vacuum pump, if present. Refer to => [ Mechanical Vacuum Pump ] See: Brakes and Traction Control/Power Brake Assist/Vacuum
Pump/Service and Repair/Mechanical Vacuum Pump.

-

Remove the 3 cylinder head cover bolts - arrows -. 

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1823

< PREV PAGE NEXT PAGE >