Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1827

Page 6
background image

1 - Press the cover upward and under the cylinder head cover seal.

2 - Press the cover against the cylinder head and onto the alignment pins.

-

Make sure the seal - arrows - fits correctly. It must not be pushed back.

-

Install all the bolts - arrows - and tighten them slightly.

‹› The bolts - A - are not on vehicles with a mechanical vacuum pump.

-

Tighten all bolts to specifications, refer to - item 18 -=> [ Bolt ] See: Cylinder Head Assembly/Service and Repair/Cylinder Head Overview.

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1827

[PREV PAGE] [NEXT PAGE]