Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1826

Page 5
background image

-

If replacing the seals in the cover, refer to => [ Timing Chain Cover Seal, Installing ] See: Seals and Gaskets/Front Crankshaft Seal/Service and
Repair.

-

Make sure the seal - arrows - fits correctly inside the cylinder head cover.

-

If necessary, remove sealant residue in places - A -. 

-

Apply a thin bead of sealant (D 176 501 A1) to the sealing surfaces on the cylinder head cover.

-

Apply some sealing compound (D 454 300 A2) to the places marked on cover - arrows -.

‹› The sealant (D 176 501 A1) hardens quickly.

-

Slide the timing chain cover, at a slight angle, onto the camshaft adjustment valves. Ensure the cylinder head cover seal is not pressed back.

Engine, Cooling and Exhaust > Engine > Actuators and Solenoids - Engine > Variable Valve Timing Actuator > Component Information > Service and Repair > Camshaft Adjuster With Timing Chain, Installing > Page 1826

[PREV PAGE] [NEXT PAGE]