Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft Seal Retainer > Component Information > Locations > Page 1915

Page 1
background image

Crankshaft Seal Retainer: Service and Repair

Sealing Flange, Transmission Side

Special tools, testers and auxiliary items required

‹› Hand Drill with Plastic Brush Attachment

‹› Protective Eyewear

‹› Sealant (D 176 501 A1)

Removing

-

Remove the transmission.

-

Remove the drive plate. Refer to => [ Drive Plate ] See: Transmission and Drivetrain/Flex Plate/Service and Repair/Drive Plate.

-

Remove the oil pan. Refer to => [ Oil Pan ] See: Engine Lubrication/Oil Pan/Service and Repair.

-

Remove the sealing flange bolts - 1 and 2 -.

CAUTION!
The cylinder head gasket could be damaged. The cylinder head gasket can kink if it is bent too much. A kinked cylinder head gasket must
be replaced.

-

Remove the sealing flange from the cylinder block horizontally. 

-

Press the crankshaft shaft seal out of the sealing flange.

Installing

‹› Tightening specifications, refer to => [ Timing Chain Cover and Sealing Flange Overview ] See: Timing Components/Timing Cover/Service and

Repair.

CAUTION!
Risk of contaminating the lubrication system with sealant residue. Carefully cover the exposed parts of the engine prevent any sealant

Engine, Cooling and Exhaust > Engine > Cylinder Block Assembly > Crankshaft Seal Retainer > Component Information > Locations > Page 1915

[PREV PAGE] [NEXT PAGE]