Workshop Repair Manuals

Volkswagen Workshop Manuals

[PREV PAGE] [NEXT PAGE]

volkswagen Workshop Repair Guides


Passat Sedan V6-3.6L (BLV) (2008)

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Service and Repair > Engine Oil, Checking Level > Page 2061

Page 1
background image

Engine Oil: Service and Repair
Engine Oil, Draining or Extracting, Changing Oil Filter and Filling Oil

03 - Service Procedures

Engine Oil, Draining or Extracting

Special tools, testers and auxiliary items required

‹› Oil extractor (V.A.G 1782)

‹› Oil absorbent towel (VAS 6204/1)

Engine Oil, Draining or Extracting

Perform the following work procedure:

‹› On engines with standing oil filter module, oil filter should be changed before the oil change. Removing the filter element will open a valve and oil

in the filter housing will flow automatically into the crankshaft housing. 

‹› If engine oil is drained and not extracted using old oil extraction unit, replace oil drain plug. This prevents leaks.

‹› Observe waste disposal regulations!

-

Extract engine oil using old oil collecting and extracting unit (V.A.G 1782).

-

Remove oil drain plug

-

Let engine oil drain.

‹› Observe waste disposal regulations!

-

Screw in new oil drain plug with sealing ring hand-tight.

-

Fill up with engine oil. Note oil specification. 

Torque specifications for oil drain plug: 30 Nm

CAUTION!
‹› Torque settings must not be exceeded

‹› A torque figure that is too high may lead to leaks or even damage the oil pan.

Oil Filter, 2.0L TFSI, Removing and Installing

Special tools, testers and auxiliary items required

Engine, Cooling and Exhaust > Engine > Engine Lubrication > Engine Oil > Component Information > Service and Repair > Engine Oil, Checking Level > Page 2061

[PREV PAGE] [NEXT PAGE]